Products

With the RH 18 loop-powered isolator, Relmatic is expanding its product range of compact and cost-effective interface technology modules.

The RH 18 loop-powered isolator is used for galvanic isolation of 0(4)... 20mA standard signals. Due to the high reliability, the extremely compact design and the cost-optimized construction, the RH 18 is the first choice in its class!

Lots of useful details: The RH 18 can also be installed in inexpensive standard terminal boxes, which are often used for decentralized measuring points, thanks to the extremely low overall depth of just 60mm. The 11.2 mm narrow modular housing for 1 or 2 channels saves a lot of space on the DIN rail.

With the RH 18 loop-powered isolator, Relmatic is expanding its product range of compact and cost-effective interface technology modules.

The RH 18 loop-powered isolator is used for galvanic isolation of 0(4)... 20mA standard signals. Due to the high reliability, the extremely compact design and the cost-optimized construction, the RH 18 is the first choice in its class!

Lots of useful details: The RH 18 can also be installed in inexpensive standard terminal boxes, which are often used for decentralized measuring points, thanks to the extremely low overall depth of just 60mm. The 11.2 mm narrow modular housing for 1 or 2 channels saves a lot of space on the DIN rail.

Calibratable THERMASGARD® RPTM 1 room pendulum temperature measuring transducer (with sleeve) with eight switchable measuring ranges, continuous output, in an impact resistant plastic housing with quick-locking screws, optionally with/without display, cable sensor with stainless steel sleeve and plastic sinter filter (exchangeable).

The pendulum sensor device has been specially designed to detect the temperature in larger rooms or halls. The resistance thermometre achieves a very good, representative measurement result due to its positioning in the room.

Calibratable THERMASGARD® RPTM 1 room pendulum temperature measuring transducer (with sleeve) with eight switchable measuring ranges, continuous output, in an impact resistant plastic housing with quick-locking screws, optionally with/without display, cable sensor with stainless steel sleeve and plastic sinter filter (exchangeable).

The pendulum sensor device has been specially designed to detect the temperature in larger rooms or halls. The resistance thermometre achieves a very good, representative measurement result due to its positioning in the room.

Calibratable THERMASGARD® RPTM 1 room pendulum temperature measuring transducer (with sleeve) with eight switchable measuring ranges, continuous output, in an impact resistant plastic housing with quick-locking screws, optionally with/without display, cable sensor with stainless steel sleeve and plastic sinter filter (exchangeable).

The pendulum sensor device has been specially designed to detect the temperature in larger rooms or halls. The resistance thermometre achieves a very good, representative measurement result due to its positioning in the room.

Calibratable THERMASGARD® RPTM 1 room pendulum temperature measuring transducer (with sleeve) with eight switchable measuring ranges, continuous output, in an impact resistant plastic housing with quick-locking screws, optionally with/without display, cable sensor with stainless steel sleeve and plastic sinter filter (exchangeable).

The pendulum sensor device has been specially designed to detect the temperature in larger rooms or halls. The resistance thermometre achieves a very good, representative measurement result due to its positioning in the room.

Calibratable THERMASGARD® RPTM 1 room pendulum temperature measuring transducer (with sleeve) with eight switchable measuring ranges, continuous output, in an impact resistant plastic housing with quick-locking screws, optionally with/without display, cable sensor with stainless steel sleeve and plastic sinter filter (exchangeable).

The pendulum sensor device has been specially designed to detect the temperature in larger rooms or halls. The resistance thermometre achieves a very good, representative measurement result due to its positioning in the room.

Calibratable THERMASGARD® RPTM 1 room pendulum temperature measuring transducer (with sleeve) with eight switchable measuring ranges, continuous output, in an impact resistant plastic housing with quick-locking screws, optionally with/without display, cable sensor with stainless steel sleeve and plastic sinter filter (exchangeable).

The pendulum sensor device has been specially designed to detect the temperature in larger rooms or halls. The resistance thermometre achieves a very good, representative measurement result due to its positioning in the room.

Calibratable THERMASGARD® RPTM 1 room pendulum temperature measuring transducer (with sleeve) with eight switchable measuring ranges, continuous output, in an impact resistant plastic housing with quick-locking screws, optionally with/without display, cable sensor with stainless steel sleeve and plastic sinter filter (exchangeable).

The pendulum sensor device has been specially designed to detect the temperature in larger rooms or halls. The resistance thermometre achieves a very good, representative measurement result due to its positioning in the room.

Calibratable THERMASGARD® RPTM 1 room pendulum temperature measuring transducer (with sleeve) with eight switchable measuring ranges, continuous output, in an impact resistant plastic housing with quick-locking screws, optionally with/without display, cable sensor with stainless steel sleeve and plastic sinter filter (exchangeable).

The pendulum sensor device has been specially designed to detect the temperature in larger rooms or halls. The resistance thermometre achieves a very good, representative measurement result due to its positioning in the room.

With the potentiometer transmitter RR 4310, Relmatic expands the product range of interface technology components with the highest functionality and reliability.

The RR 4310 potentiometer transmitter is used for galvanic isolation and conversion of potentiometric control signals. It can be used flexibly thanks to the simple range switching of the output signal, the new universal power pack and the compact design. The high level of reliability and safe isolation are further features that make the RR 4310 unrivalled.

The signal configuration can be set with a DIP switch. Subsequent readjustment or a measurement path comparison is possible using the zero/span potentiometers on the front.

The power supply isolator RC 52100 serves to feed and isolate 2- and 3-wire measuring transducers. It supplies the transmitter with auxiliary power and transmits the measurement signal to the output with a high level of accuracy, with electrical isolation. It can be used flexibly thanks to the calibrated measuring range switchover and the compact design. The high level of reliability and safe isolation are additional features that contribute to trouble-free system operation. With the RC 52100, the input and output ranges can be easily switched using a DIP switch. Subsequent readjustment is not necessary thanks to the calibrated measuring range switchover. 

The RC 52500 supply isolator is used to supply and isolate intelligent 2-wire measuring transducers. It supplies the transmitter with auxiliary power and transmits the measurement signal to the output with a high level of accuracy, with electrical isolation. In addition to the analogue signal, the RC 52500 also transmits data protocols for HART transmitters. It enables bi-directional communication with the field device from any point in the cabling. Pluggable switching combs for the auxiliary power supply ensure quick and cost-effective assembly. The 6.3 mm narrow modular housing saves considerable space in the control cabinet on the DIN rail. The RC 52500's switched-mode power supply, which has been optimized in terms of efficiency, significantly reduces the device's self-heating.

The sensor device has a housing made of impact resistant plastic, with cable gland or M12 connector according to DIN EN 61076-2-101 and with metal pressure port nozzles (quick connect optional). It is used to measure positive, negative or differential pressures in clean air, with limit value switching. The piezoresistive measuring element guarantees a high degree of reliability and accuracy.

The electronic PREMASREG® 711x pressure sensors and switches are equipped with eight switchable measuring ranges, one switching output, one continuous output, and a display for setting the switchpoint and showing the actual pressure (eight devices in one, plus differential pressure switch / differential pressure monitor, continuous pressure sensor in a single device).

The sensor device has a housing made of impact resistant plastic, with cable gland or M12 connector according to DIN EN 61076-2-101 and with metal pressure port nozzles (quick connect optional). It is used to measure positive, negative or differential pressures in clean air, with limit value switching. The piezoresistive measuring element guarantees a high degree of reliability and accuracy.

The sensor device has a housing made of impact resistant plastic, with cable gland or M12 connector according to DIN EN 61076-2-101 and with metal pressure port nozzles (quick connect optional). It is used to measure positive, negative or differential pressures in clean air, with limit value switching. The piezoresistive measuring element guarantees a high degree of reliability and accuracy.

The electronic PREMASREG® 711x pressure sensors and switches are equipped with eight switchable measuring ranges, one switching output, one continuous output, and a display for setting the switchpoint and showing the actual pressure (eight devices in one, plus differential pressure switch / differential pressure monitor, continuous pressure sensor in a single device).

The sensor device has a housing made of impact resistant plastic, with cable gland or M12 connector according to DIN EN 61076-2-101 and with metal pressure port nozzles (quick connect optional). It is used to measure positive, negative or differential pressures in clean air, with limit value switching. The piezoresistive measuring element guarantees a high degree of reliability and accuracy.

The sensor device has a housing made of impact resistant plastic, with cable gland or M12 connector according to DIN EN 61076-2-101 and with metal pressure port nozzles (quick connect optional). It is used to measure positive, negative or differential pressures in clean air, with limit value switching. The piezoresistive measuring element guarantees a high degree of reliability and accuracy.

The electronic PREMASREG® 711x pressure sensors and switches are equipped with eight switchable measuring ranges, one switching output, one continuous output, and a display for setting the switchpoint and showing the actual pressure (eight devices in one, plus differential pressure switch / differential pressure monitor, continuous pressure sensor in a single device).

The sensor device has a housing made of impact resistant plastic, with cable gland or M12 connector according to DIN EN 61076-2-101 and with metal pressure port nozzles (quick connect optional). It is used to measure positive, negative or differential pressures in clean air, with limit value switching. The piezoresistive measuring element guarantees a high degree of reliability and accuracy.

The sensor device has a housing made of impact resistant plastic, with cable gland or M12 connector according to DIN EN 61076-2-101 and with metal pressure port nozzles (quick connect optional). It is used to measure positive, negative or differential pressures in clean air, with limit value switching. The piezoresistive measuring element guarantees a high degree of reliability and accuracy.

The electronic PREMASREG® 711x pressure sensors and switches are equipped with eight switchable measuring ranges, one switching output, one continuous output, and a display for setting the switchpoint and showing the actual pressure (eight devices in one, plus differential pressure switch / differential pressure monitor, continuous pressure sensor in a single device).

The sensor device has a housing made of impact resistant plastic, with cable gland or M12 connector according to DIN EN 61076-2-101 and with metal pressure port nozzles (quick connect optional). It is used to measure positive, negative or differential pressures in clean air, with limit value switching. The piezoresistive measuring element guarantees a high degree of reliability and accuracy.

The calibratable pressure transmitters of the PREMASGARD® 711x series with eight switchable measuring ranges (eight devices in one), housing made of impact resistant plastic, optionally with/without display, with cable gland or M12 connector according to DIN EN 61076-2-101 and with metal pressure port nozzles (quick connect optional) serve to measure positive, negative or differential pressures in air. The piezoresistive measuring element is temperature-compensated and guarantees a high degree of reliability and accuracy.

The calibratable pressure transmitters of the PREMASGARD® 711x series with eight switchable measuring ranges (eight devices in one), housing made of impact resistant plastic, optionally with/without display, with cable gland or M12 connector according to DIN EN 61076-2-101 and with metal pressure port nozzles (quick connect optional) serve to measure positive, negative or differential pressures in air. The piezoresistive measuring element is temperature-compensated and guarantees a high degree of reliability and accuracy.

The calibratable pressure transmitters of the PREMASGARD® 711x series with eight switchable measuring ranges (eight devices in one), housing made of impact resistant plastic, optionally with/without display, with cable gland or M12 connector according to DIN EN 61076-2-101 and with metal pressure port nozzles (quick connect optional) serve to measure positive, negative or differential pressures in air. The piezoresistive measuring element is temperature-compensated and guarantees a high degree of reliability and accuracy.