Products

THERMASGARD® ATF 2 outside wall-mount resistance thermometre or weather sensor device (external sensor) with passive output, housing made of impact resistant plastic and quick-locking screws.

The measuring transducer serves to measure outside temperatures and temperatures in wet room and is used e.g. as an outdoor/weather sensor device for installation on outside walls, in cold storage buildings, greenhouses and halls, in the industrial sector and in agriculture. In outdoor areas, the temperature measuring transducer is installed preferably at the north side of a building or in a protected place.

THERMASGARD® ATF 2 outside wall-mount resistance thermometre or weather sensor device (external sensor) with passive output, housing made of impact resistant plastic and quick-locking screws.

The measuring transducer serves to measure outside temperatures and temperatures in wet room and is used e.g. as an outdoor/weather sensor device for installation on outside walls, in cold storage buildings, greenhouses and halls, in the industrial sector and in agriculture. In outdoor areas, the temperature measuring transducer is installed preferably at the north side of a building or in a protected place.

THERMASGARD® ATF 1 outside wall-mount resistance thermometre or weather sensor device with internal sensor and passive output, in an housing made of impact resistant plastic with quick-locking screws.

The transmitter serves to measure outdoor temperatures and temperatures in wet rooms and is used e.g. as an outdoor or weather sensor device for installation on outside walls, in cold storage buildings, greenhouses or halls in the industrial sector and in agriculture. In outdoor areas, the temperature sensor is installed preferably at the north side of a building or in a protected place. In cases of direct solar irradiation, our WS 01 sunshade protector (accessory) should be used.

THERMASGARD® ATF 1 outside wall-mount resistance thermometre or weather sensor device with internal sensor and passive output, in an housing made of impact resistant plastic with quick-locking screws.

The transmitter serves to measure outdoor temperatures and temperatures in wet rooms and is used e.g. as an outdoor or weather sensor device for installation on outside walls, in cold storage buildings, greenhouses or halls in the industrial sector and in agriculture. In outdoor areas, the temperature sensor is installed preferably at the north side of a building or in a protected place. In cases of direct solar irradiation, our WS 01 sunshade protector (accessory) should be used.

THERMASGARD® ATF 1 outside wall-mount resistance thermometre or weather sensor device with internal sensor and passive output, in an housing made of impact resistant plastic with quick-locking screws.

The transmitter serves to measure outdoor temperatures and temperatures in wet rooms and is used e.g. as an outdoor or weather sensor device for installation on outside walls, in cold storage buildings, greenhouses or halls in the industrial sector and in agriculture. In outdoor areas, the temperature sensor is installed preferably at the north side of a building or in a protected place. In cases of direct solar irradiation, our WS 01 sunshade protector (accessory) should be used.

THERMASGARD® ATF 1 outside wall-mount resistance thermometre or weather sensor device with internal sensor and passive output, in an housing made of impact resistant plastic with quick-locking screws.

The transmitter serves to measure outdoor temperatures and temperatures in wet rooms and is used e.g. as an outdoor or weather sensor device for installation on outside walls, in cold storage buildings, greenhouses or halls in the industrial sector and in agriculture. In outdoor areas, the temperature sensor is installed preferably at the north side of a building or in a protected place. In cases of direct solar irradiation, our WS 01 sunshade protector (accessory) should be used.

THERMASGARD® ATF 1 outside wall-mount resistance thermometre or weather sensor device with internal sensor and passive output, in an housing made of impact resistant plastic with quick-locking screws.

The transmitter serves to measure outdoor temperatures and temperatures in wet rooms and is used e.g. as an outdoor or weather sensor device for installation on outside walls, in cold storage buildings, greenhouses or halls in the industrial sector and in agriculture. In outdoor areas, the temperature sensor is installed preferably at the north side of a building or in a protected place. In cases of direct solar irradiation, our WS 01 sunshade protector (accessory) should be used.

THERMASGARD® ATF 1 outside wall-mount resistance thermometre or weather sensor device with internal sensor and passive output, in an housing made of impact resistant plastic with quick-locking screws.

The transmitter serves to measure outdoor temperatures and temperatures in wet rooms and is used e.g. as an outdoor or weather sensor device for installation on outside walls, in cold storage buildings, greenhouses or halls in the industrial sector and in agriculture. In outdoor areas, the temperature sensor is installed preferably at the north side of a building or in a protected place. In cases of direct solar irradiation, our WS 01 sunshade protector (accessory) should be used.

THERMASGARD® ATF 1 outside wall-mount resistance thermometre or weather sensor device with internal sensor and passive output, in an housing made of impact resistant plastic with quick-locking screws.

The transmitter serves to measure outdoor temperatures and temperatures in wet rooms and is used e.g. as an outdoor or weather sensor device for installation on outside walls, in cold storage buildings, greenhouses or halls in the industrial sector and in agriculture. In outdoor areas, the temperature sensor is installed preferably at the north side of a building or in a protected place. In cases of direct solar irradiation, our WS 01 sunshade protector (accessory) should be used.

THERMASGARD® ATF 1 outside wall-mount resistance thermometre or weather sensor device with internal sensor and passive output, in an housing made of impact resistant plastic with quick-locking screws.

The transmitter serves to measure outdoor temperatures and temperatures in wet rooms and is used e.g. as an outdoor or weather sensor device for installation on outside walls, in cold storage buildings, greenhouses or halls in the industrial sector and in agriculture. In outdoor areas, the temperature sensor is installed preferably at the north side of a building or in a protected place. In cases of direct solar irradiation, our WS 01 sunshade protector (accessory) should be used.

THERMASGARD® ATF 1 outside wall-mount resistance thermometre or weather sensor device with internal sensor and passive output, in an housing made of impact resistant plastic with quick-locking screws.

The transmitter serves to measure outdoor temperatures and temperatures in wet rooms and is used e.g. as an outdoor or weather sensor device for installation on outside walls, in cold storage buildings, greenhouses or halls in the industrial sector and in agriculture. In outdoor areas, the temperature sensor is installed preferably at the north side of a building or in a protected place. In cases of direct solar irradiation, our WS 01 sunshade protector (accessory) should be used.

THERMASGARD® ATF 1 outside wall-mount resistance thermometre or weather sensor device with internal sensor and passive output, in an housing made of impact resistant plastic with quick-locking screws.

The transmitter serves to measure outdoor temperatures and temperatures in wet rooms and is used e.g. as an outdoor or weather sensor device for installation on outside walls, in cold storage buildings, greenhouses or halls in the industrial sector and in agriculture. In outdoor areas, the temperature sensor is installed preferably at the north side of a building or in a protected place. In cases of direct solar irradiation, our WS 01 sunshade protector (accessory) should be used.

THERMASGARD® ATF 1 outside wall-mount resistance thermometre or weather sensor device with internal sensor and passive output, in an housing made of impact resistant plastic with quick-locking screws.

The transmitter serves to measure outdoor temperatures and temperatures in wet rooms and is used e.g. as an outdoor or weather sensor device for installation on outside walls, in cold storage buildings, greenhouses or halls in the industrial sector and in agriculture. In outdoor areas, the temperature sensor is installed preferably at the north side of a building or in a protected place. In cases of direct solar irradiation, our WS 01 sunshade protector (accessory) should be used.

THERMASGARD® ATF 1 outside wall-mount resistance thermometre or weather sensor device with internal sensor and passive output, in an housing made of impact resistant plastic with quick-locking screws.

The transmitter serves to measure outdoor temperatures and temperatures in wet rooms and is used e.g. as an outdoor or weather sensor device for installation on outside walls, in cold storage buildings, greenhouses or halls in the industrial sector and in agriculture. In outdoor areas, the temperature sensor is installed preferably at the north side of a building or in a protected place. In cases of direct solar irradiation, our WS 01 sunshade protector (accessory) should be used.

THERMASGARD® ATF 1 outside wall-mount resistance thermometre or weather sensor device with internal sensor and passive output, in an housing made of impact resistant plastic with quick-locking screws.

The transmitter serves to measure outdoor temperatures and temperatures in wet rooms and is used e.g. as an outdoor or weather sensor device for installation on outside walls, in cold storage buildings, greenhouses or halls in the industrial sector and in agriculture. In outdoor areas, the temperature sensor is installed preferably at the north side of a building or in a protected place. In cases of direct solar irradiation, our WS 01 sunshade protector (accessory) should be used.

THERMASGARD® ATF 1 outside wall-mount resistance thermometre or weather sensor device with internal sensor and passive output, in an housing made of impact resistant plastic with quick-locking screws.

The transmitter serves to measure outdoor temperatures and temperatures in wet rooms and is used e.g. as an outdoor or weather sensor device for installation on outside walls, in cold storage buildings, greenhouses or halls in the industrial sector and in agriculture. In outdoor areas, the temperature sensor is installed preferably at the north side of a building or in a protected place. In cases of direct solar irradiation, our WS 01 sunshade protector (accessory) should be used.

THERMASGARD® ATF 1 outside wall-mount resistance thermometre or weather sensor device with internal sensor and passive output, in an housing made of impact resistant plastic with quick-locking screws.

The transmitter serves to measure outdoor temperatures and temperatures in wet rooms and is used e.g. as an outdoor or weather sensor device for installation on outside walls, in cold storage buildings, greenhouses or halls in the industrial sector and in agriculture. In outdoor areas, the temperature sensor is installed preferably at the north side of a building or in a protected place. In cases of direct solar irradiation, our WS 01 sunshade protector (accessory) should be used.

THERMASGARD® ATF 1 outside wall-mount resistance thermometre or weather sensor device with internal sensor and passive output, in an housing made of impact resistant plastic with quick-locking screws.

The transmitter serves to measure outdoor temperatures and temperatures in wet rooms and is used e.g. as an outdoor or weather sensor device for installation on outside walls, in cold storage buildings, greenhouses or halls in the industrial sector and in agriculture. In outdoor areas, the temperature sensor is installed preferably at the north side of a building or in a protected place. In cases of direct solar irradiation, our WS 01 sunshade protector (accessory) should be used.

THERMASGARD® ATF 1 outside wall-mount resistance thermometre or weather sensor device with internal sensor and passive output, in an housing made of impact resistant plastic with quick-locking screws.

The transmitter serves to measure outdoor temperatures and temperatures in wet rooms and is used e.g. as an outdoor or weather sensor device for installation on outside walls, in cold storage buildings, greenhouses or halls in the industrial sector and in agriculture. In outdoor areas, the temperature sensor is installed preferably at the north side of a building or in a protected place. In cases of direct solar irradiation, our WS 01 sunshade protector (accessory) should be used.

Calibratable THERMASGARD® ATM 2 - VA outside temperature measuring transducer with eight switchable measuring ranges, external sensor, continuous output, rugged housing in V4A stainless steel, with cable gland or M12 connector according to DIN EN 61076-2-101.

The transmitter serves to detect outside temperatures and temperatures in wet rooms. It is used e.g. on outside walls, in cold storage buildings and greenhouses, in the industrial sector and in agriculture. Installation in outdoor areas is preferably performed at the north side of a building or in a protected place.

Calibratable THERMASGARD® ATM 2 - VA outside temperature measuring transducer with eight switchable measuring ranges, external sensor, continuous output, rugged housing in V4A stainless steel, with cable gland or M12 connector according to DIN EN 61076-2-101.

The transmitter serves to detect outside temperatures and temperatures in wet rooms. It is used e.g. on outside walls, in cold storage buildings and greenhouses, in the industrial sector and in agriculture. Installation in outdoor areas is preferably performed at the north side of a building or in a protected place.

Calibratable THERMASGARD® ATM 2 - VA outside temperature measuring transducer with eight switchable measuring ranges, external sensor, continuous output, rugged housing in V4A stainless steel, with cable gland or M12 connector according to DIN EN 61076-2-101.

The transmitter serves to detect outside temperatures and temperatures in wet rooms. It is used e.g. on outside walls, in cold storage buildings and greenhouses, in the industrial sector and in agriculture. Installation in outdoor areas is preferably performed at the north side of a building or in a protected place.

Calibratable THERMASGARD® ATM 2 - VA outside temperature measuring transducer with eight switchable measuring ranges, external sensor, continuous output, rugged housing in V4A stainless steel, with cable gland or M12 connector according to DIN EN 61076-2-101.

The transmitter serves to detect outside temperatures and temperatures in wet rooms. It is used e.g. on outside walls, in cold storage buildings and greenhouses, in the industrial sector and in agriculture. Installation in outdoor areas is preferably performed at the north side of a building or in a protected place.

With the passive supply isolator RC 58, Relmatic expands the product range of compact and cost-effective interface technology modules.

The passive power supply RC 58 is used to feed 2-wire measuring transducers. The 24 V supply from the control system is transmitted galvanically isolated to the 2-wire transmitter with a low voltage drop. Due to the high reliability, the extremely compact design and the cost-optimized construction, the RC 58 is the first choice in its class!