Products

THERMASGARD® ASTF resistance thermometre with passive output, terminal box housing made of impact resistant plastic and housing cover with quick-locking screws. The radiation sensor device is specifically designed for temperature detection in wet areas or in larger rooms/halls.

The on-wall radiation temperature transducer determines the effective portion of active radiation or the effective radiant heat at the measured location. Excellent measuring results, representative of the specific room, are achieved thanks to the measuring method employed by the dark radiation sensor.

THERMASGARD® ASTF resistance thermometre with passive output, terminal box housing made of impact resistant plastic and housing cover with quick-locking screws. The radiation sensor device is specifically designed for temperature detection in wet areas or in larger rooms/halls.

The on-wall radiation temperature transducer determines the effective portion of active radiation or the effective radiant heat at the measured location. Excellent measuring results, representative of the specific room, are achieved thanks to the measuring method employed by the dark radiation sensor.

THERMASGARD® ASTF resistance thermometre with passive output, terminal box housing made of impact resistant plastic and housing cover with quick-locking screws. The radiation sensor device is specifically designed for temperature detection in wet areas or in larger rooms/halls.

The on-wall radiation temperature transducer determines the effective portion of active radiation or the effective radiant heat at the measured location. Excellent measuring results, representative of the specific room, are achieved thanks to the measuring method employed by the dark radiation sensor.

THERMASGARD® ASTF resistance thermometre with passive output, terminal box housing made of impact resistant plastic and housing cover with quick-locking screws. The radiation sensor device is specifically designed for temperature detection in wet areas or in larger rooms/halls.

The on-wall radiation temperature transducer determines the effective portion of active radiation or the effective radiant heat at the measured location. Excellent measuring results, representative of the specific room, are achieved thanks to the measuring method employed by the dark radiation sensor.

THERMASGARD® ASTF resistance thermometre with passive output, terminal box housing made of impact resistant plastic and housing cover with quick-locking screws. The radiation sensor device is specifically designed for temperature detection in wet areas or in larger rooms/halls.

The on-wall radiation temperature transducer determines the effective portion of active radiation or the effective radiant heat at the measured location. Excellent measuring results, representative of the specific room, are achieved thanks to the measuring method employed by the dark radiation sensor.

THERMASGARD® ASTF resistance thermometre with passive output, terminal box housing made of impact resistant plastic and housing cover with quick-locking screws. The radiation sensor device is specifically designed for temperature detection in wet areas or in larger rooms/halls.

The on-wall radiation temperature transducer determines the effective portion of active radiation or the effective radiant heat at the measured location. Excellent measuring results, representative of the specific room, are achieved thanks to the measuring method employed by the dark radiation sensor.

The PHOTASGARD® AHKF light intensity or twilight sensor device supports six switchable measuring ranges (six devices in one) and measures the luminous intensity. It is used to control luminaries, lighting systems, Venetian and canvas blinds, etc., and to monitor lighting conditions at workplaces, in greenhouses, storage halls, workshops, corridors, outdoor areas, industrial halls and offices as well as in residential and business facilities. Further applications also include daylight-dependant constant light control, light intensity monitoring, twilight detection an sushade equipment control to avoid undesired heating-up of rooms. As a multi-functional device, it minimises your variety of types and stock keeping while covering a greater range of universal applications.

The PHOTASGARD® AHKF light intensity or twilight sensor device supports six switchable measuring ranges (six devices in one) and measures the luminous intensity. It is used to control luminaries, lighting systems, Venetian and canvas blinds, etc., and to monitor lighting conditions at workplaces, in greenhouses, storage halls, workshops, corridors, outdoor areas, industrial halls and offices as well as in residential and business facilities. Further applications also include daylight-dependant constant light control, light intensity monitoring, twilight detection an sushade equipment control to avoid undesired heating-up of rooms. As a multi-functional device, it minimises your variety of types and stock keeping while covering a greater range of universal applications.

The KINASGARD® ABWF motion/presence transmitter detects the presence of persons and movements. It serves to monitor and detect status conditions and to control motion-dependent room functions, e.g. as a motion detector for lowering the temperature of unoccupied rooms.

The motion sensor device is used in corridors, outdoor areas, industrial halls, offices, residential and commercial premises. The sensor detects movements over an aperture angle of 110° and a perimetre of 360°. The patented lens system with 20 individual lenses results in very small dark areas of only a few centimetres in width even at a distance of 10 m, thereby reliably detecting small movements. 

Calibratable THERMASGARD® ATM 2 outside temperature measuring transducer with eight switchable measuring ranges, external sensor, continuous output, housing made of impact resistant plastic with quick-release screws, optionally with/without display, with cable gland or M12 connector according to DIN EN 61076-2-101.

The transmitter serves to detect outside temperatures, temperatures in wet rooms, and is installed e.g. on outside walls, in cold storage buildings and greenhouses, in the industrial sector and in agriculture. Installation in outdoor areas is preferably performed at the north side of a building or in a protected place.

Calibratable THERMASGARD® ATM 2 outside temperature measuring transducer with eight switchable measuring ranges, external sensor, continuous output, housing made of impact resistant plastic with quick-release screws, optionally with/without display, with cable gland or M12 connector according to DIN EN 61076-2-101.

The transmitter serves to detect outside temperatures, temperatures in wet rooms, and is installed e.g. on outside walls, in cold storage buildings and greenhouses, in the industrial sector and in agriculture. Installation in outdoor areas is preferably performed at the north side of a building or in a protected place.

Calibratable THERMASGARD® ATM 2 outside temperature measuring transducer with eight switchable measuring ranges, external sensor, continuous output, housing made of impact resistant plastic with quick-release screws, optionally with/without display, with cable gland or M12 connector according to DIN EN 61076-2-101.

The transmitter serves to detect outside temperatures, temperatures in wet rooms, and is installed e.g. on outside walls, in cold storage buildings and greenhouses, in the industrial sector and in agriculture. Installation in outdoor areas is preferably performed at the north side of a building or in a protected place.

Calibratable THERMASGARD® ATM 2 outside temperature measuring transducer with eight switchable measuring ranges, external sensor, continuous output, housing made of impact resistant plastic with quick-release screws, optionally with/without display, with cable gland or M12 connector according to DIN EN 61076-2-101.

The transmitter serves to detect outside temperatures, temperatures in wet rooms, and is installed e.g. on outside walls, in cold storage buildings and greenhouses, in the industrial sector and in agriculture. Installation in outdoor areas is preferably performed at the north side of a building or in a protected place.

Calibratable THERMASGARD® ATM 2 outside temperature measuring transducer with eight switchable measuring ranges, external sensor, continuous output, housing made of impact resistant plastic with quick-release screws, optionally with/without display, with cable gland or M12 connector according to DIN EN 61076-2-101.

The transmitter serves to detect outside temperatures, temperatures in wet rooms, and is installed e.g. on outside walls, in cold storage buildings and greenhouses, in the industrial sector and in agriculture. Installation in outdoor areas is preferably performed at the north side of a building or in a protected place.

Calibratable THERMASGARD® ATM 2 outside temperature measuring transducer with eight switchable measuring ranges, external sensor, continuous output, housing made of impact resistant plastic with quick-release screws, optionally with/without display, with cable gland or M12 connector according to DIN EN 61076-2-101.

The transmitter serves to detect outside temperatures, temperatures in wet rooms, and is installed e.g. on outside walls, in cold storage buildings and greenhouses, in the industrial sector and in agriculture. Installation in outdoor areas is preferably performed at the north side of a building or in a protected place.

Calibratable THERMASGARD® ATM 2 outside temperature measuring transducer with eight switchable measuring ranges, external sensor, continuous output, housing made of impact resistant plastic with quick-release screws, optionally with/without display, with cable gland or M12 connector according to DIN EN 61076-2-101.

The transmitter serves to detect outside temperatures, temperatures in wet rooms, and is installed e.g. on outside walls, in cold storage buildings and greenhouses, in the industrial sector and in agriculture. Installation in outdoor areas is preferably performed at the north side of a building or in a protected place.

Calibratable THERMASGARD® ATM 2 outside temperature measuring transducer with eight switchable measuring ranges, external sensor, continuous output, housing made of impact resistant plastic with quick-release screws, optionally with/without display, with cable gland or M12 connector according to DIN EN 61076-2-101.

The transmitter serves to detect outside temperatures, temperatures in wet rooms, and is installed e.g. on outside walls, in cold storage buildings and greenhouses, in the industrial sector and in agriculture. Installation in outdoor areas is preferably performed at the north side of a building or in a protected place.

THERMASGARD® ATF 2 outside wall-mount resistance thermometre or weather sensor device (external sensor) with passive output, housing made of impact resistant plastic and quick-locking screws.

The measuring transducer serves to measure outside temperatures and temperatures in wet room and is used e.g. as an outdoor/weather sensor device for installation on outside walls, in cold storage buildings, greenhouses and halls, in the industrial sector and in agriculture. In outdoor areas, the temperature measuring transducer is installed preferably at the north side of a building or in a protected place.

THERMASGARD® ATF 2 outside wall-mount resistance thermometre or weather sensor device (external sensor) with passive output, housing made of impact resistant plastic and quick-locking screws.

The measuring transducer serves to measure outside temperatures and temperatures in wet room and is used e.g. as an outdoor/weather sensor device for installation on outside walls, in cold storage buildings, greenhouses and halls, in the industrial sector and in agriculture. In outdoor areas, the temperature measuring transducer is installed preferably at the north side of a building or in a protected place.

THERMASGARD® ATF 2 outside wall-mount resistance thermometre or weather sensor device (external sensor) with passive output, housing made of impact resistant plastic and quick-locking screws.

The measuring transducer serves to measure outside temperatures and temperatures in wet room and is used e.g. as an outdoor/weather sensor device for installation on outside walls, in cold storage buildings, greenhouses and halls, in the industrial sector and in agriculture. In outdoor areas, the temperature measuring transducer is installed preferably at the north side of a building or in a protected place.

THERMASGARD® ATF 2 outside wall-mount resistance thermometre or weather sensor device (external sensor) with passive output, housing made of impact resistant plastic and quick-locking screws.

The measuring transducer serves to measure outside temperatures and temperatures in wet room and is used e.g. as an outdoor/weather sensor device for installation on outside walls, in cold storage buildings, greenhouses and halls, in the industrial sector and in agriculture. In outdoor areas, the temperature measuring transducer is installed preferably at the north side of a building or in a protected place.

THERMASGARD® ATF 2 outside wall-mount resistance thermometre or weather sensor device (external sensor) with passive output, housing made of impact resistant plastic and quick-locking screws.

The measuring transducer serves to measure outside temperatures and temperatures in wet room and is used e.g. as an outdoor/weather sensor device for installation on outside walls, in cold storage buildings, greenhouses and halls, in the industrial sector and in agriculture. In outdoor areas, the temperature measuring transducer is installed preferably at the north side of a building or in a protected place.

THERMASGARD® ATF 2 outside wall-mount resistance thermometre or weather sensor device (external sensor) with passive output, housing made of impact resistant plastic and quick-locking screws.

The measuring transducer serves to measure outside temperatures and temperatures in wet room and is used e.g. as an outdoor/weather sensor device for installation on outside walls, in cold storage buildings, greenhouses and halls, in the industrial sector and in agriculture. In outdoor areas, the temperature measuring transducer is installed preferably at the north side of a building or in a protected place.

THERMASGARD® ATF 2 outside wall-mount resistance thermometre or weather sensor device (external sensor) with passive output, housing made of impact resistant plastic and quick-locking screws.

The measuring transducer serves to measure outside temperatures and temperatures in wet room and is used e.g. as an outdoor/weather sensor device for installation on outside walls, in cold storage buildings, greenhouses and halls, in the industrial sector and in agriculture. In outdoor areas, the temperature measuring transducer is installed preferably at the north side of a building or in a protected place.