List of products by brand S+S Regeltechnik

Maintenance-free room sensor AERASGARD® RTM - CO2 - SD with active output, automatic calibration (fixed), in an elegant plastic housing with snap-on cover, for determining the CO2 content of the air (0...2000 ppm) and the temperature (0...+50°C). The measuring transducer converts the measured values into a standard signal of 0-10 V.

The sensor device is used in offices, hotels, convention centres, apartments, shops, etc. for the purpose of evaluating the indoor climate. This enables energy-saving room ventilation on an as-needed basis, thereby reducing operating costs and improving well-being.

Maintenance-free room sensor AERASGARD® RTM - CO2 - SD with active output, automatic calibration (fixed), in an elegant plastic housing with snap-on cover, for determining the CO2 content of the air (0...2000 ppm) and the temperature (0...+50°C). The measuring transducer converts the measured values into a standard signal of 0-10 V.

The sensor device is used in offices, hotels, convention centres, apartments, shops, etc. for the purpose of evaluating the indoor climate. This enables energy-saving room ventilation on an as-needed basis, thereby reducing operating costs and improving well-being.

Maintenance-free room sensor AERASGARD® RTM - CO2 - SD with active output, automatic calibration (fixed), in an elegant plastic housing with snap-on cover, for determining the CO2 content of the air (0...2000 ppm) and the temperature (0...+50°C). The measuring transducer converts the measured values into a standard signal of 0-10 V.

The sensor device is used in offices, hotels, convention centres, apartments, shops, etc. for the purpose of evaluating the indoor climate. This enables energy-saving room ventilation on an as-needed basis, thereby reducing operating costs and improving well-being.

Maintenance-free room sensor AERASGARD® RTM - CO2 - SD with active output, automatic calibration (fixed), in an elegant plastic housing with snap-on cover, for determining the CO2 content of the air (0...2000 ppm) and the temperature (0...+50°C). The measuring transducer converts the measured values into a standard signal of 0-10 V.

The sensor device is used in offices, hotels, convention centres, apartments, shops, etc. for the purpose of evaluating the indoor climate. This enables energy-saving room ventilation on an as-needed basis, thereby reducing operating costs and improving well-being.

Maintenance-free room sensor AERASGARD® RTM - CO2 - SD with active output, automatic calibration (fixed), in an elegant plastic housing with snap-on cover, for determining the CO2 content of the air (0...2000 ppm) and the temperature (0...+50°C). The measuring transducer converts the measured values into a standard signal of 0-10 V.

The sensor device is used in offices, hotels, convention centres, apartments, shops, etc. for the purpose of evaluating the indoor climate. This enables energy-saving room ventilation on an as-needed basis, thereby reducing operating costs and improving well-being.

Maintenance-free AERASGARD® RPS - SD room air quality measuring transducer with active output, in an elegant plastic housing with snap-on cover, base with 4-hole attachment, for detecting the particulate matter (PM) content (0...500 g/m3).

The transmitter converts the measurand into a standard signal of 0-10 V (fixed).

Maintenance-free, multifunctional AERASGARD® RFTM - PS - CO2 - W room air quality measuring transducer with active/switching output, automatic calibration, in an elegant plastic housing with snap-on cover, base with 4-hole attachment, optionally with/without display, for detecting air humidity (0...100% r.H.), temperature (0...+50°C), particulate matter (PM)

Maintenance-free AERASGARD® RPS - SD room air quality measuring transducer with active output, in an elegant plastic housing with snap-on cover, base with 4-hole attachment, for detecting the particulate matter (PM) content (0...500 g/m3).

The transmitter converts the measurand into a standard signal of 0-10 V (fixed).

Maintenance-free, multifunctional AERASGARD® RFTM - PS - CO2 - W room air quality measuring transducer with active/switching output, automatic calibration, in an elegant plastic housing with snap-on cover, base with 4-hole attachment, optionally with/without display, for detecting air humidity (0...100% r.H.), temperature (0...+50°C), particulate matter (PM)

Maintenance-free AERASGARD® RPS - SD room air quality measuring transducer with active output, in an elegant plastic housing with snap-on cover, base with 4-hole attachment, for detecting the particulate matter (PM) content (0...500 g/m3).

The transmitter converts the measurand into a standard signal of 0-10 V (fixed).

Maintenance-free, multifunctional AERASGARD® RFTM - PS - CO2 - W room air quality measuring transducer with active/switching output, automatic calibration, in an elegant plastic housing with snap-on cover, base with 4-hole attachment, optionally with/without display, for detecting air humidity (0...100% r.H.), temperature (0...+50°C), particulate matter (PM)

Maintenance-free AERASGARD® RPS - SD room air quality measuring transducer with active output, in an elegant plastic housing with snap-on cover, base with 4-hole attachment, for detecting the particulate matter (PM) content (0...500 g/m3).

The transmitter converts the measurand into a standard signal of 0-10 V (fixed).

Maintenance-free, multifunctional AERASGARD® RFTM - PS - CO2 - W room air quality measuring transducer with active/switching output, automatic calibration, in an elegant plastic housing with snap-on cover, base with 4-hole attachment, optionally with/without display, for detecting air humidity (0...100% r.H.), temperature (0...+50°C), particulate matter (PM)

Calibratable PREMASGARD® ALD barometre with active output (U/I switchable) and 4 measuring ranges (max. 600...1100 hPa, switchable), in a compact plastic housing with quick-locking screws, optionally with/without display.

The pressure transmitter serves to measure the atmospheric air pressure in clean air (non-precipitating) or other non-aggressive, non-combustible gases. It is used in various applications such as ventilation and air conditioning systems, in meteorological measurement stations and air-pressure-dependent control systems.

Calibratable PREMASGARD® ALD barometre with active output (U/I switchable) and 4 measuring ranges (max. 600...1100 hPa, switchable), in a compact plastic housing with quick-locking screws, optionally with/without display.

The pressure transmitter serves to measure the atmospheric air pressure in clean air (non-precipitating) or other non-aggressive, non-combustible gases. It is used in various applications such as ventilation and air conditioning systems, in meteorological measurement stations and air-pressure-dependent control systems.

The KINASGARD® DBWF-C ceiling-mounted motion transmitter detects the presence of persons and movements and has a switching contact as an output (normally open contact). The motion detector is used for status monitoring/detection and for motion-dependent control of room functions, e.g. for lowering the temperature of unoccupied rooms.

The KINASGARD® DBWF ceiling motion sensor detects the presence of persons and movements and has a switching contact as an output (changeover contact). The motion detector is used for monitoring and detecting status conditions and for motion-dependent control of room functions, e.g. lowering the temperature of unused rooms.

The THERMASGARD® DTF device is a small built-in resistance thermometre with passive output for in-wall installation, e.g. in plasterboard walls or suspended ceilings.

The DTF ceiling temperature measuring transducer is preferably installed in ceilings and walls. It blends in seamlessly with the overall architectural design and detects the temperature at the surface. The connecting head is pluggable for quick, easy mounting.

The THERMASGARD® DTF device is a small built-in resistance thermometre with passive output for in-wall installation, e.g. in plasterboard walls or suspended ceilings.

The DTF ceiling temperature measuring transducer is preferably installed in ceilings and walls. It blends in seamlessly with the overall architectural design and detects the temperature at the surface. The connecting head is pluggable for quick, easy mounting.

The THERMASGARD® DTF device is a small built-in resistance thermometre with passive output for in-wall installation, e.g. in plasterboard walls or suspended ceilings.

The DTF ceiling temperature measuring transducer is preferably installed in ceilings and walls. It blends in seamlessly with the overall architectural design and detects the temperature at the surface. The connecting head is pluggable for quick, easy mounting.

The THERMASGARD® DTF device is a small built-in resistance thermometre with passive output for in-wall installation, e.g. in plasterboard walls or suspended ceilings.

The DTF ceiling temperature measuring transducer is preferably installed in ceilings and walls. It blends in seamlessly with the overall architectural design and detects the temperature at the surface. The connecting head is pluggable for quick, easy mounting.

The THERMASGARD® DTF device is a small built-in resistance thermometre with passive output for in-wall installation, e.g. in plasterboard walls or suspended ceilings.

The DTF ceiling temperature measuring transducer is preferably installed in ceilings and walls. It blends in seamlessly with the overall architectural design and detects the temperature at the surface. The connecting head is pluggable for quick, easy mounting.

The THERMASGARD® DTF device is a small built-in resistance thermometre with passive output for in-wall installation, e.g. in plasterboard walls or suspended ceilings.

The DTF ceiling temperature measuring transducer is preferably installed in ceilings and walls. It blends in seamlessly with the overall architectural design and detects the temperature at the surface. The connecting head is pluggable for quick, easy mounting.

The THERMASGARD® DTF device is a small built-in resistance thermometre with passive output for in-wall installation, e.g. in plasterboard walls or suspended ceilings.

The DTF ceiling temperature measuring transducer is preferably installed in ceilings and walls. It blends in seamlessly with the overall architectural design and detects the temperature at the surface. The connecting head is pluggable for quick, easy mounting.

The THERMASGARD® DTF device is a small built-in resistance thermometre with passive output for in-wall installation, e.g. in plasterboard walls or suspended ceilings.

The DTF ceiling temperature measuring transducer is preferably installed in ceilings and walls. It blends in seamlessly with the overall architectural design and detects the temperature at the surface. The connecting head is pluggable for quick, easy mounting.

Maintenance-free AERASGARD® RCO2-AS xx CO2 detector with traffic-light indicator and acoustic signal, self-calibrating, in an attractive plastic housing, for determining the CO2 content of the room air (0...3000 ppm). The measuring transducer converts the measurand to a standard signal, which is directly visualised by colour LEDs (traffic light indicator). An additional signal tone sounds when warning levels are reached (can be switched off via DIP switch).

Maintenance-free AERASGARD® RCO2-AS xx CO2 detector with traffic-light indicator and acoustic signal, self-calibrating, in an attractive plastic housing, for determining the CO2 content of the room air (0...3000 ppm). The measuring transducer converts the measurand to a standard signal, which is directly visualised by colour LEDs (traffic light indicator). An additional signal tone sounds when warning levels are reached (can be switched off via DIP switch).

Maintenance-free AERASGARD® RCO2-AS xx CO2 detector with traffic-light indicator and acoustic signal, self-calibrating, in an attractive plastic housing, for determining the CO2 content of the room air (0...3000 ppm). The measuring transducer converts the measurand to a standard signal, which is directly visualised by colour LEDs (traffic light indicator). An additional signal tone sounds when warning levels are reached (can be switched off via DIP switch).