The KINASGARD® / PHOTASGARD® RBWF / LF motion and light sensors are combined instruments and detect motion as well as the light intensity by means of a diffusor. They also detect the presence of persons and ambient conditions. The RBWF / LF devices issue a standard signal of 0-10 V or 4...20 mA for light intensity, and hav a switching (changeover contact) output for motion detection.
Power consumption
< 1 W at 24 V DC; < 2 VA at 24 V AC
Voltage supply
15...36 V DC
depending on working resistance, residual ripple stabilised ± 0.3 V
Working resistance
Ra (ohm) = (Ub -14 V)/ 0.02 A for I variant
Output, motion sensor
without/ with motion + presence,
potential-free changeover contact (24 V), 1 A ohmic load
Sensor
infra-red motion sensor, light sensor with diffuser
After-running time
adjustable from 4 s to 16 min
Deviation, light sensor
typically < 5 % of final value
Ambient temperature
0...+50 °C
Electrical connection
0.14 - 1.5 mm²
via terminal screws on circuit board
Housing
plastic, material ABS,
colour pure white (similar to RAL 9010)
Dimensions
85 x 85 x 27 mm (Baldur 1)
Protection class
III (according to EN 60 730)
Output, light sensor
4...20 mA
Protection type
IP 30
The KINASGARD® / PHOTASGARD® RBWF / LF motion and light sensors are combined instruments and detect motion as well as the light intensity by means of a diffusor. They also detect the presence of persons and ambient conditions. The RBWF / LF devices issue a standard signal of 0-10 V or 4...20 mA for light intensity, and hav a switching (changeover contact) output for motion detection.
