Condensation control switch HYGRASREG® KW

Voltage supply

24 V AC (± 20 %) and

15…36 V DC

Switchpoint

approx. 93 % r.H. (permanently set)

Power consumption

< 1.1 VA/ 24 V DC ; < 2.2 VA/ 24 V AC

Output

potential-free changeover contact (24 V), 1 A ohmic load

Output signal

potential-free changeover contact (24 V), 1 A ohmic load

Sensor protection

membrane filter

Medium

clean air and

non-aggressive, non-combustible gases

Process connection

endless metal strap with metal tightener,

300 mm, for pipes up to 3 ''

(included in scope of delivery)

Electrical connection

0.14 - 1.5 mm² via terminal screws

Cable connection

cable gland, plastic (M 16 x 1.5; with strain relief, exchangeable, max. inner diameter 10.4 mm) or

M12 connector according to DIN EN 61076-2-101 (optional on request)

Housing

plastic, UV-stabilised,

material polyamide, 30 % glass-globe-reinforced

colour traffic white (similar to RAL 9016)

ALTF 02 with snap-on lid,

Housing dimensions

72 x 64 x 37.8 mm (Tyr 01)

Cable gland

M 16 x 1.5, including strain relief, exchangeable,

max. inner diameter 10.4 mm

Installation

The mounting position should be selected

so that no condensate can enter the sensor system

in the event that condensation forms!

KW - SD

with strap for direct mounting on pipes or

for direct mounting on flat surfaces (e.g. walls, ceilings)

KW - SD - external

with detached sensor head

(cable length KL = 1.5 m) for mounting on pipes

Protection class

III (according to EN 60 730)

Protection type

IP 43