Two-point Controller ZPR-21

Brand
€47.26
Tax included

 Adjustable switching points

The two-point controller is activated by an analogue signal of 0 - 10 V. The switch-on and switchoff point of the controller can be set individually by

the integrated potentiometers.

• AUTO-OFF-ON with feedback

The coupling module can switch to automatic or

manual mode. In automatic mode the contact with

feedback is closed; therefore a logic 1 results on

the controller. Multiple feedbacks can be connected in series.

• DIN 45 mm housing

The standardised housing enables the coupling

module to be installed by means of a 45 mm cutout behind the covering; it only requires a width of

17.5 mm for this

Quantity
Add to Compare
Add to Wishlist

Input side

Rated voltage Un A1 - A2 24 V AC/DC

Tolerance -15%; +10%

Current consumption at 24 V AC / 24 V DC 80 mA / 20 mA

Current consumption input YR at 10 V 1 mA

Input voltage YR 0 - 10 V

Switch-on point (Threshold value) adjustable 1 - 10 V

Switch-off point (hysteresis) adjustable 5 - 75% below the switch-on point

Output side

Switching voltage 250 V AC / 24 V DC

Switching current / contact material 12 A / AC1, AgNi

Max. peak current 20 A / <3 s

Switching capacity 3000 VA / AC1, 288 W / DC

Min. DC switching capacity 300 mW, 5 V, 10 mA

Switch for feedback

Max. switching capacity 100 mA / 30 V

General data

Relative turn-on time 100%

Ambient temperature -20°C … +55°C

Storage temperature -30°C … +70°C

Mounting position Any

Fixing DIN rail EN 50022-35

Protection class of front IP 40

Voltage limitation class III

Degree of contamination 2

Connection cross section 2.5 mm2

Weight 52 g

Standards EN 60669-2-1

ZPR-21

16 same category products: