Process sensors

THERMASGARD® ATF 1 outside wall-mount resistance thermometre or weather sensor device with internal sensor and passive output, in an housing made of impact resistant plastic with quick-locking screws.

The transmitter serves to measure outdoor temperatures and temperatures in wet rooms and is used e.g. as an outdoor or weather sensor device for installation on outside walls, in cold storage buildings, greenhouses or halls in the industrial sector and in agriculture. In outdoor areas, the temperature sensor is installed preferably at the north side of a building or in a protected place. In cases of direct solar irradiation, our WS 01 sunshade protector (accessory) should be used.

THERMASGARD® ATF 1 outside wall-mount resistance thermometre or weather sensor device with internal sensor and passive output, in an housing made of impact resistant plastic with quick-locking screws.

The transmitter serves to measure outdoor temperatures and temperatures in wet rooms and is used e.g. as an outdoor or weather sensor device for installation on outside walls, in cold storage buildings, greenhouses or halls in the industrial sector and in agriculture. In outdoor areas, the temperature sensor is installed preferably at the north side of a building or in a protected place. In cases of direct solar irradiation, our WS 01 sunshade protector (accessory) should be used.

THERMASGARD® ATF 1 outside wall-mount resistance thermometre or weather sensor device with internal sensor and passive output, in an housing made of impact resistant plastic with quick-locking screws.

The transmitter serves to measure outdoor temperatures and temperatures in wet rooms and is used e.g. as an outdoor or weather sensor device for installation on outside walls, in cold storage buildings, greenhouses or halls in the industrial sector and in agriculture. In outdoor areas, the temperature sensor is installed preferably at the north side of a building or in a protected place. In cases of direct solar irradiation, our WS 01 sunshade protector (accessory) should be used.

THERMASGARD® ATF 1 outside wall-mount resistance thermometre or weather sensor device with internal sensor and passive output, in an housing made of impact resistant plastic with quick-locking screws.

The transmitter serves to measure outdoor temperatures and temperatures in wet rooms and is used e.g. as an outdoor or weather sensor device for installation on outside walls, in cold storage buildings, greenhouses or halls in the industrial sector and in agriculture. In outdoor areas, the temperature sensor is installed preferably at the north side of a building or in a protected place. In cases of direct solar irradiation, our WS 01 sunshade protector (accessory) should be used.

Calibratable THERMASGARD® ATM 2 - VA outside temperature measuring transducer with eight switchable measuring ranges, external sensor, continuous output, rugged housing in V4A stainless steel, with cable gland or M12 connector according to DIN EN 61076-2-101.

The transmitter serves to detect outside temperatures and temperatures in wet rooms. It is used e.g. on outside walls, in cold storage buildings and greenhouses, in the industrial sector and in agriculture. Installation in outdoor areas is preferably performed at the north side of a building or in a protected place.

Calibratable THERMASGARD® ATM 2 - VA outside temperature measuring transducer with eight switchable measuring ranges, external sensor, continuous output, rugged housing in V4A stainless steel, with cable gland or M12 connector according to DIN EN 61076-2-101.

The transmitter serves to detect outside temperatures and temperatures in wet rooms. It is used e.g. on outside walls, in cold storage buildings and greenhouses, in the industrial sector and in agriculture. Installation in outdoor areas is preferably performed at the north side of a building or in a protected place.

Calibratable THERMASGARD® ATM 2 - VA outside temperature measuring transducer with eight switchable measuring ranges, external sensor, continuous output, rugged housing in V4A stainless steel, with cable gland or M12 connector according to DIN EN 61076-2-101.

The transmitter serves to detect outside temperatures and temperatures in wet rooms. It is used e.g. on outside walls, in cold storage buildings and greenhouses, in the industrial sector and in agriculture. Installation in outdoor areas is preferably performed at the north side of a building or in a protected place.

Calibratable THERMASGARD® ATM 2 - VA outside temperature measuring transducer with eight switchable measuring ranges, external sensor, continuous output, rugged housing in V4A stainless steel, with cable gland or M12 connector according to DIN EN 61076-2-101.

The transmitter serves to detect outside temperatures and temperatures in wet rooms. It is used e.g. on outside walls, in cold storage buildings and greenhouses, in the industrial sector and in agriculture. Installation in outdoor areas is preferably performed at the north side of a building or in a protected place.

Calibratable THERMASGARD® RPTM 1 room pendulum temperature measuring transducer (with sleeve) with eight switchable measuring ranges, continuous output, in an impact resistant plastic housing with quick-locking screws, optionally with/without display, cable sensor with stainless steel sleeve and plastic sinter filter (exchangeable).

The pendulum sensor device has been specially designed to detect the temperature in larger rooms or halls. The resistance thermometre achieves a very good, representative measurement result due to its positioning in the room.

Calibratable THERMASGARD® RPTM 1 room pendulum temperature measuring transducer (with sleeve) with eight switchable measuring ranges, continuous output, in an impact resistant plastic housing with quick-locking screws, optionally with/without display, cable sensor with stainless steel sleeve and plastic sinter filter (exchangeable).

The pendulum sensor device has been specially designed to detect the temperature in larger rooms or halls. The resistance thermometre achieves a very good, representative measurement result due to its positioning in the room.

Calibratable THERMASGARD® RPTM 1 room pendulum temperature measuring transducer (with sleeve) with eight switchable measuring ranges, continuous output, in an impact resistant plastic housing with quick-locking screws, optionally with/without display, cable sensor with stainless steel sleeve and plastic sinter filter (exchangeable).

The pendulum sensor device has been specially designed to detect the temperature in larger rooms or halls. The resistance thermometre achieves a very good, representative measurement result due to its positioning in the room.

Calibratable THERMASGARD® RPTM 1 room pendulum temperature measuring transducer (with sleeve) with eight switchable measuring ranges, continuous output, in an impact resistant plastic housing with quick-locking screws, optionally with/without display, cable sensor with stainless steel sleeve and plastic sinter filter (exchangeable).

The pendulum sensor device has been specially designed to detect the temperature in larger rooms or halls. The resistance thermometre achieves a very good, representative measurement result due to its positioning in the room.

Calibratable THERMASGARD® RPTM 1 room pendulum temperature measuring transducer (with sleeve) with eight switchable measuring ranges, continuous output, in an impact resistant plastic housing with quick-locking screws, optionally with/without display, cable sensor with stainless steel sleeve and plastic sinter filter (exchangeable).

The pendulum sensor device has been specially designed to detect the temperature in larger rooms or halls. The resistance thermometre achieves a very good, representative measurement result due to its positioning in the room.

Calibratable THERMASGARD® RPTM 1 room pendulum temperature measuring transducer (with sleeve) with eight switchable measuring ranges, continuous output, in an impact resistant plastic housing with quick-locking screws, optionally with/without display, cable sensor with stainless steel sleeve and plastic sinter filter (exchangeable).

The pendulum sensor device has been specially designed to detect the temperature in larger rooms or halls. The resistance thermometre achieves a very good, representative measurement result due to its positioning in the room.

Calibratable THERMASGARD® RPTM 1 room pendulum temperature measuring transducer (with sleeve) with eight switchable measuring ranges, continuous output, in an impact resistant plastic housing with quick-locking screws, optionally with/without display, cable sensor with stainless steel sleeve and plastic sinter filter (exchangeable).

The pendulum sensor device has been specially designed to detect the temperature in larger rooms or halls. The resistance thermometre achieves a very good, representative measurement result due to its positioning in the room.

Calibratable THERMASGARD® RPTM 1 room pendulum temperature measuring transducer (with sleeve) with eight switchable measuring ranges, continuous output, in an impact resistant plastic housing with quick-locking screws, optionally with/without display, cable sensor with stainless steel sleeve and plastic sinter filter (exchangeable).

The pendulum sensor device has been specially designed to detect the temperature in larger rooms or halls. The resistance thermometre achieves a very good, representative measurement result due to its positioning in the room.

The sensor device has a housing made of impact resistant plastic, with cable gland or M12 connector according to DIN EN 61076-2-101 and with metal pressure port nozzles (quick connect optional). It is used to measure positive, negative or differential pressures in clean air, with limit value switching. The piezoresistive measuring element guarantees a high degree of reliability and accuracy.

The electronic PREMASREG® 711x pressure sensors and switches are equipped with eight switchable measuring ranges, one switching output, one continuous output, and a display for setting the switchpoint and showing the actual pressure (eight devices in one, plus differential pressure switch / differential pressure monitor, continuous pressure sensor in a single device).

The sensor device has a housing made of impact resistant plastic, with cable gland or M12 connector according to DIN EN 61076-2-101 and with metal pressure port nozzles (quick connect optional). It is used to measure positive, negative or differential pressures in clean air, with limit value switching. The piezoresistive measuring element guarantees a high degree of reliability and accuracy.

The sensor device has a housing made of impact resistant plastic, with cable gland or M12 connector according to DIN EN 61076-2-101 and with metal pressure port nozzles (quick connect optional). It is used to measure positive, negative or differential pressures in clean air, with limit value switching. The piezoresistive measuring element guarantees a high degree of reliability and accuracy.

The electronic PREMASREG® 711x pressure sensors and switches are equipped with eight switchable measuring ranges, one switching output, one continuous output, and a display for setting the switchpoint and showing the actual pressure (eight devices in one, plus differential pressure switch / differential pressure monitor, continuous pressure sensor in a single device).

The sensor device has a housing made of impact resistant plastic, with cable gland or M12 connector according to DIN EN 61076-2-101 and with metal pressure port nozzles (quick connect optional). It is used to measure positive, negative or differential pressures in clean air, with limit value switching. The piezoresistive measuring element guarantees a high degree of reliability and accuracy.

The sensor device has a housing made of impact resistant plastic, with cable gland or M12 connector according to DIN EN 61076-2-101 and with metal pressure port nozzles (quick connect optional). It is used to measure positive, negative or differential pressures in clean air, with limit value switching. The piezoresistive measuring element guarantees a high degree of reliability and accuracy.

The electronic PREMASREG® 711x pressure sensors and switches are equipped with eight switchable measuring ranges, one switching output, one continuous output, and a display for setting the switchpoint and showing the actual pressure (eight devices in one, plus differential pressure switch / differential pressure monitor, continuous pressure sensor in a single device).

The sensor device has a housing made of impact resistant plastic, with cable gland or M12 connector according to DIN EN 61076-2-101 and with metal pressure port nozzles (quick connect optional). It is used to measure positive, negative or differential pressures in clean air, with limit value switching. The piezoresistive measuring element guarantees a high degree of reliability and accuracy.

The sensor device has a housing made of impact resistant plastic, with cable gland or M12 connector according to DIN EN 61076-2-101 and with metal pressure port nozzles (quick connect optional). It is used to measure positive, negative or differential pressures in clean air, with limit value switching. The piezoresistive measuring element guarantees a high degree of reliability and accuracy.

The electronic PREMASREG® 711x pressure sensors and switches are equipped with eight switchable measuring ranges, one switching output, one continuous output, and a display for setting the switchpoint and showing the actual pressure (eight devices in one, plus differential pressure switch / differential pressure monitor, continuous pressure sensor in a single device).

The sensor device has a housing made of impact resistant plastic, with cable gland or M12 connector according to DIN EN 61076-2-101 and with metal pressure port nozzles (quick connect optional). It is used to measure positive, negative or differential pressures in clean air, with limit value switching. The piezoresistive measuring element guarantees a high degree of reliability and accuracy.