Process sensors

Calibratable mean value temperature measuring transducer THERMASGARD® MWTM (rod sensor) with eight switchable measuring ranges, continuous output, fully active flexible sensor rod for mean value measurement, plastic-coated copper protective tube (sturdy version), housing made from impact-resistant plastic and housing cover with quick-locking screws.

This sensor is used for the detection of average temperatures (mean values) in gaseous media, e.g. in ventilation and air conditioning ducts over the entire cross section, or over a defined length. Laid along a meandering route, it uniformly detects the surrounding temperature as a duct sensor. 

Calibratable mean value temperature measuring transducer THERMASGARD® MWTM (rod sensor) with eight switchable measuring ranges, continuous output, fully active flexible sensor rod for mean value measurement, plastic-coated copper protective tube (sturdy version), housing made from impact-resistant plastic and housing cover with quick-locking screws.

This sensor is used for the detection of average temperatures (mean values) in gaseous media, e.g. in ventilation and air conditioning ducts over the entire cross section, or over a defined length. Laid along a meandering route, it uniformly detects the surrounding temperature as a duct sensor. 

Calibratable mean value temperature measuring transducer THERMASGARD® MWTM (rod sensor) with eight switchable measuring ranges, continuous output, fully active flexible sensor rod for mean value measurement, plastic-coated copper protective tube (sturdy version), housing made from impact-resistant plastic and housing cover with quick-locking screws.

This sensor is used for the detection of average temperatures (mean values) in gaseous media, e.g. in ventilation and air conditioning ducts over the entire cross section, or over a defined length. Laid along a meandering route, it uniformly detects the surrounding temperature as a duct sensor. 

Calibratable mean value temperature measuring transducer THERMASGARD® MWTM (rod sensor) with eight switchable measuring ranges, continuous output, fully active flexible sensor rod for mean value measurement, plastic-coated copper protective tube (sturdy version), housing made from impact-resistant plastic and housing cover with quick-locking screws.

This sensor is used for the detection of average temperatures (mean values) in gaseous media, e.g. in ventilation and air conditioning ducts over the entire cross section, or over a defined length. Laid along a meandering route, it uniformly detects the surrounding temperature as a duct sensor. 

Calibratable mean value temperature measuring transducer THERMASGARD® MWTM (rod sensor) with eight switchable measuring ranges, continuous output, fully active flexible sensor rod for mean value measurement, plastic-coated copper protective tube (sturdy version), housing made from impact-resistant plastic and housing cover with quick-locking screws.

This sensor is used for the detection of average temperatures (mean values) in gaseous media, e.g. in ventilation and air conditioning ducts over the entire cross section, or over a defined length. Laid along a meandering route, it uniformly detects the surrounding temperature as a duct sensor. 

Electronic HYGRASREG® RHT-30 room hygrostat and/or room thermostat with one continuous and two switching outputs, adjustable switching thresholds, with/without optional display for indicating actual humidity and/or actual temperature (accuracy class ±2.0% r.H.). The setpoints can be allocated to relative humidity and/or temperature.

Electronic HYGRASREG® RHT-30 room hygrostat and/or room thermostat with one continuous and two switching outputs, adjustable switching thresholds, with/without optional display for indicating actual humidity and/or actual temperature (accuracy class ±2.0% r.H.). The setpoints can be allocated to relative humidity and/or temperature.

THERMASGARD® ASTF resistance thermometre with passive output, terminal box housing made of impact resistant plastic and housing cover with quick-locking screws. The radiation sensor device is specifically designed for temperature detection in wet areas or in larger rooms/halls.

The on-wall radiation temperature transducer determines the effective portion of active radiation or the effective radiant heat at the measured location. Excellent measuring results, representative of the specific room, are achieved thanks to the measuring method employed by the dark radiation sensor.

THERMASGARD® ASTF resistance thermometre with passive output, terminal box housing made of impact resistant plastic and housing cover with quick-locking screws. The radiation sensor device is specifically designed for temperature detection in wet areas or in larger rooms/halls.

The on-wall radiation temperature transducer determines the effective portion of active radiation or the effective radiant heat at the measured location. Excellent measuring results, representative of the specific room, are achieved thanks to the measuring method employed by the dark radiation sensor.

THERMASGARD® ASTF resistance thermometre with passive output, terminal box housing made of impact resistant plastic and housing cover with quick-locking screws. The radiation sensor device is specifically designed for temperature detection in wet areas or in larger rooms/halls.

The on-wall radiation temperature transducer determines the effective portion of active radiation or the effective radiant heat at the measured location. Excellent measuring results, representative of the specific room, are achieved thanks to the measuring method employed by the dark radiation sensor.

THERMASGARD® ASTF resistance thermometre with passive output, terminal box housing made of impact resistant plastic and housing cover with quick-locking screws. The radiation sensor device is specifically designed for temperature detection in wet areas or in larger rooms/halls.

The on-wall radiation temperature transducer determines the effective portion of active radiation or the effective radiant heat at the measured location. Excellent measuring results, representative of the specific room, are achieved thanks to the measuring method employed by the dark radiation sensor.

THERMASGARD® ASTF resistance thermometre with passive output, terminal box housing made of impact resistant plastic and housing cover with quick-locking screws. The radiation sensor device is specifically designed for temperature detection in wet areas or in larger rooms/halls.

The on-wall radiation temperature transducer determines the effective portion of active radiation or the effective radiant heat at the measured location. Excellent measuring results, representative of the specific room, are achieved thanks to the measuring method employed by the dark radiation sensor.

THERMASGARD® ASTF resistance thermometre with passive output, terminal box housing made of impact resistant plastic and housing cover with quick-locking screws. The radiation sensor device is specifically designed for temperature detection in wet areas or in larger rooms/halls.

The on-wall radiation temperature transducer determines the effective portion of active radiation or the effective radiant heat at the measured location. Excellent measuring results, representative of the specific room, are achieved thanks to the measuring method employed by the dark radiation sensor.

THERMASGARD® ASTF resistance thermometre with passive output, terminal box housing made of impact resistant plastic and housing cover with quick-locking screws. The radiation sensor device is specifically designed for temperature detection in wet areas or in larger rooms/halls.

The on-wall radiation temperature transducer determines the effective portion of active radiation or the effective radiant heat at the measured location. Excellent measuring results, representative of the specific room, are achieved thanks to the measuring method employed by the dark radiation sensor.

THERMASGARD® ASTF resistance thermometre with passive output, terminal box housing made of impact resistant plastic and housing cover with quick-locking screws. The radiation sensor device is specifically designed for temperature detection in wet areas or in larger rooms/halls.

The on-wall radiation temperature transducer determines the effective portion of active radiation or the effective radiant heat at the measured location. Excellent measuring results, representative of the specific room, are achieved thanks to the measuring method employed by the dark radiation sensor.

The PHOTASGARD® AHKF light intensity or twilight sensor device supports six switchable measuring ranges (six devices in one) and measures the luminous intensity. It is used to control luminaries, lighting systems, Venetian and canvas blinds, etc., and to monitor lighting conditions at workplaces, in greenhouses, storage halls, workshops, corridors, outdoor areas, industrial halls and offices as well as in residential and business facilities. Further applications also include daylight-dependant constant light control, light intensity monitoring, twilight detection an sushade equipment control to avoid undesired heating-up of rooms. As a multi-functional device, it minimises your variety of types and stock keeping while covering a greater range of universal applications.

The PHOTASGARD® AHKF light intensity or twilight sensor device supports six switchable measuring ranges (six devices in one) and measures the luminous intensity. It is used to control luminaries, lighting systems, Venetian and canvas blinds, etc., and to monitor lighting conditions at workplaces, in greenhouses, storage halls, workshops, corridors, outdoor areas, industrial halls and offices as well as in residential and business facilities. Further applications also include daylight-dependant constant light control, light intensity monitoring, twilight detection an sushade equipment control to avoid undesired heating-up of rooms. As a multi-functional device, it minimises your variety of types and stock keeping while covering a greater range of universal applications.

The KINASGARD® ABWF motion/presence transmitter detects the presence of persons and movements. It serves to monitor and detect status conditions and to control motion-dependent room functions, e.g. as a motion detector for lowering the temperature of unoccupied rooms.

The motion sensor device is used in corridors, outdoor areas, industrial halls, offices, residential and commercial premises. The sensor detects movements over an aperture angle of 110° and a perimetre of 360°. The patented lens system with 20 individual lenses results in very small dark areas of only a few centimetres in width even at a distance of 10 m, thereby reliably detecting small movements. 

Calibratable THERMASGARD® ATM 2 outside temperature measuring transducer with eight switchable measuring ranges, external sensor, continuous output, housing made of impact resistant plastic with quick-release screws, optionally with/without display, with cable gland or M12 connector according to DIN EN 61076-2-101.

The transmitter serves to detect outside temperatures, temperatures in wet rooms, and is installed e.g. on outside walls, in cold storage buildings and greenhouses, in the industrial sector and in agriculture. Installation in outdoor areas is preferably performed at the north side of a building or in a protected place.

Calibratable THERMASGARD® ATM 2 outside temperature measuring transducer with eight switchable measuring ranges, external sensor, continuous output, housing made of impact resistant plastic with quick-release screws, optionally with/without display, with cable gland or M12 connector according to DIN EN 61076-2-101.

The transmitter serves to detect outside temperatures, temperatures in wet rooms, and is installed e.g. on outside walls, in cold storage buildings and greenhouses, in the industrial sector and in agriculture. Installation in outdoor areas is preferably performed at the north side of a building or in a protected place.

Calibratable THERMASGARD® ATM 2 outside temperature measuring transducer with eight switchable measuring ranges, external sensor, continuous output, housing made of impact resistant plastic with quick-release screws, optionally with/without display, with cable gland or M12 connector according to DIN EN 61076-2-101.

The transmitter serves to detect outside temperatures, temperatures in wet rooms, and is installed e.g. on outside walls, in cold storage buildings and greenhouses, in the industrial sector and in agriculture. Installation in outdoor areas is preferably performed at the north side of a building or in a protected place.

Calibratable THERMASGARD® ATM 2 outside temperature measuring transducer with eight switchable measuring ranges, external sensor, continuous output, housing made of impact resistant plastic with quick-release screws, optionally with/without display, with cable gland or M12 connector according to DIN EN 61076-2-101.

The transmitter serves to detect outside temperatures, temperatures in wet rooms, and is installed e.g. on outside walls, in cold storage buildings and greenhouses, in the industrial sector and in agriculture. Installation in outdoor areas is preferably performed at the north side of a building or in a protected place.

Calibratable THERMASGARD® ATM 2 outside temperature measuring transducer with eight switchable measuring ranges, external sensor, continuous output, housing made of impact resistant plastic with quick-release screws, optionally with/without display, with cable gland or M12 connector according to DIN EN 61076-2-101.

The transmitter serves to detect outside temperatures, temperatures in wet rooms, and is installed e.g. on outside walls, in cold storage buildings and greenhouses, in the industrial sector and in agriculture. Installation in outdoor areas is preferably performed at the north side of a building or in a protected place.

Calibratable THERMASGARD® ATM 2 outside temperature measuring transducer with eight switchable measuring ranges, external sensor, continuous output, housing made of impact resistant plastic with quick-release screws, optionally with/without display, with cable gland or M12 connector according to DIN EN 61076-2-101.

The transmitter serves to detect outside temperatures, temperatures in wet rooms, and is installed e.g. on outside walls, in cold storage buildings and greenhouses, in the industrial sector and in agriculture. Installation in outdoor areas is preferably performed at the north side of a building or in a protected place.